Amazon stocks a variety of materials, including nitrile (Buna), neoprene, EPDM, gum rubber, SBR, silicone, & red rubber. In addition, it’s available in various lengths, thicknesses of 1/16” – 1”, & widths of 4” – 48”. Many other sizes, shapes & colors are available as well, so feel free to call our expert staff, and we will gladly cater to your specific requirements!
Amazon is happy to answer any question you might have about their products. Feel free to type it in the box below and we'll get back to you with an answer as soon as possible. Our work and internet hours are Monday-Friday from 9am-5pm.
Click on the image above
to view our entire online!
About Amazon | News & Updates | Products | Send Us Feedback |
© All Rights Reserved. Amazon Hose and Rubber | 1-800-506-5514
I need a 3/16″ or so thick rubber sheet, 1′ x 1.5′, for shock-mounting a radiator so it would need to take temperatures up to 210 degrees or so and remain flexible down to 25 degrees, and be resistant to antifreeze and oil.
EPDM would be the best material for those temperatures. We have it in 3/16″ thickness on rolls that are 36″ wide and sell it by the foot.
Im looking for a rubber strip thats 3.5″ wide 1/8″ thick and about 25′ long that’s one peice do you carry anything like that
We carry 1/8″ thick neoprene sheeting and can custom cut strips like that for you. I will email you with further information.
I need a very small piece of solid Black Gum Rubber 1/4″ thick 5″x5″ square.
Can you provide this small piece?
Thanks
I would only have gum rubber in the natural tan color, not in black. Would you be able to use that?
If so, we have it on rolls that are 36″ wide and sell it by the foot, so the least you could buy would be 12″ x 36″.
Let me know if you have any other questions or need pricing.
I need a custom gasket for an industrial oven that gets up to 300 deg F. Can you make this gasket?
What I have for making gaskets is flat sheet rubber and flat non-asbestos material for high temp applications. Is the gasket you are looking at something flat that will be bolted between two flanges, or something like that, or is it the cushioned gasket like what you see on a oven door?
What type of rubber do you recommend for a gasket on a manual water pump, inside the pump.
For a gasket inside of a water pump you should be fine with either neoprene or red rubber. We have both of those materials in different thicknesses on rolls and sell them by the foot. Let me know what you need and we can take care of you.
How much would a sheet of 1/4 inch thick gum rubber be?
We have that in stock, I’ll send you a quote right away!
Do you have a 1/4 inch think small sheet of gum rubber? I Would like to make a drum pad with it but i can’t find a good deal.
We do have gum rubber sheeting in ¼” thickness. We have it on a roll that is 36” wide and sell it by the foot. I will email you with pricing information.
Hello,
Do you have 2mm silicone/gum rubber sheeting or similar that I can use for my vacuum forming boxes?
We have gum rubber sheeting in 1/16″ and 1/8″ if either one of those would work for you.
what widths do you carry 1/4 inch non marking rubber? what is the minimum length i can order?
We have 1/4″ thick white nitrile rubber on rolls 36″ wide and sell it by the foot.
I am looking for 1/4 gum rubber 50 in x 16 ft.
We only stock 1/4″ gum rubber in 36″ wide, but we can also order it in 48″ wide if that will work.
I need to replace the diaphragm in a hooka air compressor for which parts are no longer available. I believe I can make one if I can obtain the proper material which appears to be approximately 1/16″ thick neoprene with a single ply reinforcement. Is a product like this available?
Yes, we carry 1/16″ thick cloth inserted neoprene sheeting. We have it on rolls 4 ft wide and sell it by the running foot.
I need approximately 800 lf of 2″ wide EDPM rubber to be used as a gasket. The gasket is going to be used to separate a 1/4″ Eco Cement board and an aluminum furring strip. The thickness of the rubber doesn’t matter so the thinner the better.
Thanks,
Randy
Thanks for your inquiry, Randy! I’ve emailed you with a few questions to make sure we quote exactly what you need for your job.
Do you carry cork/nitrile (buna) sheets used to make gaskets?
We carry commercial grade nitrile sheeting in stock, but we don’t carry any cork sheeting.
do you carry nepoprene for soft rubber gasket material 3/8″ thick X 1″ wide? I need about 20 feet. thanks alan
In 3/8″ Neoprene we offer 36″ or 48″ wide. If you can use Skirtboard Rubber we have 3/8″ thick as narrow as 4″.
I’m looking for a rubber mat to place under our hydraulic machines for sound isolation. Some of our other offices have purchased a 3′ by 4′ pad in the past and it works well. can you let me know what the part number is, and how do I open an account? Thanks.
Mark Higinbotham
Construction Superintendent
Otis Elevator
We can definitely take care of that for you. I will email you a quote on the same rubber pads we provide to your Orlando location.
I’m searching for red sheet silicone-50 durometer-1/64″ x 36″ wide and amber latex tubing 1/16ID x 1/32 wall. Do you have such critters?
Thanks in advance for your time.
We can order in the silicone sheeting for you. We only stock it in 1/16″ and 1/8″ thicknesses. The latex tubing is in stock in our Miami location.
do you have in stock in Orlando 1/32 inch sheet rubber (same quality as the 1/16 and 1/8 that I get from you? Thanks
Ray
Yes, we carry 1/32″ neoprene sheeting in stock.